Xilinx Virtex® UltraScale Field Programmable Gate Arrays
Xilinx Virtex® UltraScale™ Field Programmable Gate Arrays are devices enabled by stacked silicon interconnect (SSI) technology to address system requirements for applications. FPGAs are semiconductor devices that are based around a matrix of configurable logic blocks (CLBs) connected via programmable interconnects. The devices' performance and integration are optimized at 20nm, including serial I/O bandwidth and logic capacity. Virtex UltraScale FPGAs are also ideal for applications ranging from 400G networking to large-scale ASIC prototyping and emulation. Virtex-7 is among four FPGA families (Spartan-7, Artix-7, and Kintex-7 are the others) that address system requirements ranging from small-form factor, cost-sensitive, high-volume applications to ultra high-end connectivity bandwidth, logic capacity, and signal-processing capability.
Features
Increased System PerformanceUp to two speed-grade improvement with high utilization30G transceivers for chip-to-chip, chip-to-optics, 28G backplanes16G backplane capable transceivers at half the power2400Mb/s DDR4 for robust operation over varying PVTBOM cost reductionUp to 50% lower cost – half the cost per port for Nx100G systemsVCXO and fractional PLL integration reduces clocking component cost2400Mb/s DDR4 in a mid-speed grade
Xilinx Newest
Xilinx Zynq UltraScale+ RFSoC ZCU1275 Characterization Kit provides everything you need to characterize and evaluate the Zynq UltraScale+ XCZU29DR-2FFVF1760E RFSoC.
Date: 2019-07-12Xilinx UltraScale™ FPGA KCU1250 Characterization Kit provides everything you need to evaluate the 20 GTH 16.3Gbps transceivers available on the UltraScale XCKU040-FFVA1156 FPGA.
Date: 2019-07-12Xilinx Virtex®-7 FPGA VC7203 Characterization Kit provides the hardware environment for characterizing and evaluating 28 GTX (12.5Gbps) transceivers of the onboard Virtex-7 V485T FPGA.
Date: 2019-07-12Xilinx FMC XM104 Connectivity Card is designed to provide access to eight serial transceivers on the FMC HPC connector found on Xilinx FMC-supported boards including Virtex®-6 ML605.
Date: 2019-07-12Xilinx Virtex®-7 FPGA VC7215 Characterization Kit provides the hardware environment for characterizing and evaluating 80 GTH (13.1Gbps) transceivers of the onboard Virtex-7 V690T FPGA.
Date: 2019-07-12Xilinx AMS101 Evaluation Card is part of the Analog Mixed Signal Evaluation Platform which allows testing of the Xilinx Analog-to-Digital Converter and Analog Mixed Signal technology.
Date: 2019-07-12Xilinx Virtex® FPGA VCU1287 Characterization Kit provides everything you need to characterize and evaluate the 32 GTH and 32 GTY transceivers available on the Virtex® UltraScale™ XCVU095-FFVB2104E FPGA
Date: 2019-07-12Xilinx Virtex®-7 FPGA VC7222 Characterization Kit provides the hardware environment for characterizing and evaluating the GTH and GTZ transceivers available on the Virtex-7 XC7VH580T-G2HCG1155E FPGA.
Date: 2019-07-12